Wasseraufbereitung für Industrie & Gewerbe
Wasseraufbereitung für Privat & Haushalt
Requirements
Proceedings
Hauswasserfilter
Filter housing
Filter cherries
Filter-Sets
Zubehör für Vorfilter
Enthärtungsanlagen fürs Einfamilienhaus
Enthärtungsanlagen fürs Mehrfamilienhaus
Enthärtungsanlagen für Bauherren
Enthärtungsanlagen für Industrie und Gewerbe
Accessories for softening systems
UV disinfection systems
Trinkwasserdesinfektion mit Natriumhypochlorit
Accessories for disinfection systems
Umkehrosmoseanlagen für den Privatgebrauch
Umkehrosmoseanlagen für Industrie und Gewerbe
Plug & Play complete systems with softening
Accessories for osmosis systems
Mixed bed resin
Enteisenungsanlagen für Brunnenwasser
Nitrafilter NO3
Deacidification systems
Kiesfilter TURBIDEX
Zubehör für Filteranlagen
Demineralized water bottling
sewage
Connection fittings
Dosing agent
Measuring instruments
Reinforced hoses
Pipe separator & system separator
Verbrauchsmaterial
Enthärtungsanlagen für Bauherren (1 Products)
1 Products
BASIC water softening system in a carefree package for builders
(4)
Nominal flow (max. flow): bis 2,7 m³/h
Number of columns: 1 (Basic)
control valve: Clack WS 1
Wasserbedarf tägl. ca.: bis 1.000 Liter
wählbare Kapazitäten: 20 bis 60 m³ x °dH
Single-column water softening system for small households and single-family homes in a complete set including installation service, connection set and 1x 25 kg salt - builder's offer only applies if there are no water pipes in your house yet
Water softening systems for builders
Thanks to constant controls, the tap water in Germany is of the highest quality. Nevertheless, many homeowners in many parts of Germany complain about hard water and the limescale that can form as a result.
Hard water is when it has a high calcium and magnesium content. These two substances form the often undesirable limescale, especially when exposed to heat. This not only settles on the beautiful fittings, the shower wall, the kettle and the washing machine, but also in the pipes where you can't see it. Over the years, this can cause significant damage, so that in the worst case, the devices or pipes have to be replaced.
We therefore recommend that you protect your pipe network and the devices connected to it from the very beginning. Our water softening systems use ion exchange to completely remove the hardness-forming calcium and magnesium from your drinking water. You then no longer have to worry about limescale
Water pipes not installed yet?
Are you building and haven't installed your water pipes yet? Then the worry-free package for builders is the right one for you.
Water pipes installed
Even if your lines have already been installed, we have the right offer for you.
You may also be interested in
Enthärtungsanlagen fürs EinfamilienhausEnthärtungsanlagen fürs Mehrfamilienhaus
Enthärtungsanlagen fürs Ein- und Mehrfamilienhaus
Enthärtungsanlagen für Industrie und Gewerbe
Accessories for softening systems
Configurator
Water softening system test
Latest Reviews
Do you have questions?
+497251936760contact form
Request a quote
Product: BASIC water softening system
The resin cartridges in your Basic 40 softening system generally do not need to be replaced because they regenerate themselves. The regeneration of the resin is an automated process that takes place during the cleaning cycles of the system. Here are some details:
Regeneration process: During regeneration, the resin is flushed with a salt solution, which dissolves and removes the accumulated calcium and magnesium ions (which are responsible for water hardness) from the resin. This “renews” the resin and can be used effectively to soften water again.
Regular cleaning: This regeneration is carried out regularly, depending on the amount of water used and the hardness of the water. In a 4-person household with a water hardness of 20° dH, the system will regenerate more frequently to ensure efficiency.
No replacement necessary: As long as the system is properly maintained and the regenerating salt is topped up regularly, the resin cartridges do not need to be replaced. However, you should regularly inspect and maintain the system to ensure its longevity and optimal performance.
In summary, the resin cartridges in your Basic 40 system are maintained effectively by the built-in regeneration process and therefore do not require regular replacement.
Product: BASIC water softening system
It is best to let the salt empty until the water is visible.
Then refill and ideally not full to the brim so that there is not too much weight on the salt.
If you keep filling the container without waiting until you see the water at the bottom, clumps can occur.
Product: BASIC water softening system
According to the DIN standard, maintenance should be carried out by a specialist at least every 12 months to ensure optimal function and safety of the system.
However, our water softening systems are designed to be so reliable that many customers carry out regular checks themselves. As long as the system is working properly and no problems occur, there are no legal requirements that make maintenance mandatory. Nevertheless, we recommend checking the system regularly and calling in a specialist if necessary to ensure long-term safety and efficiency.
Product: DUPLEX water softening system
Product: BASIC water softening system
If our fitters are not completely sure, we are happy to offer an on-site appointment. But this is the absolute exception.
Pages
